GM Modern Muscle Message Board Index
FAQ  |   Search  |   Memberlist  |   Usergroups  |   Profile  |   You have no new messages  |   Log out [ The Nemesis_ZR2 ]

Turbo Questions
Goto page 1, 2, 3, 4, 5, 6, 7, 8  Next
 
Post new topic   Reply to topic    Nebraska GM Modern Muscle Forum Index -> Lounge
View previous topic :: View next topic  
Author Message
The Nemesis_ZR2



Joined: 05 Oct 2007
Posts: 66

PostPosted: Wed Nov 07, 2007 2:50 pm    Post subject: Turbo Questions Reply with quote Edit/Delete this post

First off, Jay, stay out of this.

Ok. I didn't want to mention it but I was thinking about turbo charging my Vette. I got to thinking about it and how in efficient even turbos are (compressor efficiencies of about 80% at best).

Since a turbo's function is to pressurize incoming air and force it into the upper motor, and turbos are driven by high pressure exhaust gas created from the combustion process, couldn't I just bypass the turbo altogether and route my headers back into the throttle bodies?

Since I have CFI, I could balance the DEI (direct exhaust injection as I just coined it) by feeding one header into each throttle body. Yes, the charge air wouldn’t be that cold, but it would be under a hell of a lot more pressure.

I attached a quick sketch below:


There are still a few things I need to work out:
1) How do I get the CFI aircleaner to fit in a way that hides this plumbing?
2) Does anyone make a V-band clamp that will bolt an exhaust header to a CFI throttle body?
3) What pinion angle should I use in my rear-end? I’m sure there will be a noticeable difference in torque output.

What do you guys think?
_________________
1 of 2,430 Gold Metallic coupes built...... #00521--15.2-- 1/4 mile run
Back to top
View user's profile Send private message
stevewix



Joined: 28 Mar 2006
Posts: 1004

PostPosted: Wed Nov 07, 2007 2:54 pm    Post subject: Reply with quote

you dumb ass motherfucker.
_________________
1970 Chevelle
370 ci Iron Block LS motor, GT47-88, TH400...
6.27 @ 115

2004 CRF450R FS, New black plastic/rims/seat/tires/tubes/brakes/air filter/fork seals/chain guides/etc. Metal Mulisha Graphics, A1 condition. $4k.
Back to top
View user's profile Send private message
atomicsix



Joined: 03 Apr 2006
Posts: 99

PostPosted: Wed Nov 07, 2007 3:15 pm    Post subject: Reply with quote

This is such a bad idea, there is no control over the reaction, you could have unlimited power.

Kind of like pluging an extension cord back into it's self, your going to blow shit up, don't mess with stuff like this.
Back to top
View user's profile Send private message
blackdak318



Joined: 29 Mar 2006
Posts: 86

PostPosted: Wed Nov 07, 2007 3:38 pm    Post subject: Reply with quote

LOL best post evar. Not to mention there would be little to no oxygen in the exhaust because most of it has already been burnt up.
_________________
- Mark
Back to top
View user's profile Send private message AIM Address
blown454ss



Joined: 29 Mar 2006
Posts: 928
Location: under your sisters bed

PostPosted: Wed Nov 07, 2007 3:45 pm    Post subject: Reply with quote

Laughing Laughing Laughing
_________________
68 nova (under construction)
Back to top
View user's profile Send private message
Orange SS



Joined: 29 Mar 2006
Posts: 686
Location: Florida

PostPosted: Wed Nov 07, 2007 4:18 pm    Post subject: Reply with quote

oh my God , you are retarded....
Back to top
View user's profile Send private message
wildthing



Joined: 29 Apr 2006
Posts: 205

PostPosted: Wed Nov 07, 2007 4:32 pm    Post subject: Reply with quote

Laughing Laughing Laughing Laughing Laughing Laughing


OMG!!! DEI!!! Did Dale Earnhardt Inc come up with that!!!??? Laughing Laughing Laughing
Back to top
View user's profile Send private message
88iroc-z



Joined: 29 Mar 2006
Posts: 25
Location: lincoln

PostPosted: Wed Nov 07, 2007 5:04 pm    Post subject: Reply with quote

ok most of the time i dont even bother with responding to these kind of questions but WOW
_________________
383 stroker
Back to top
View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
ne98ls1



Joined: 26 Jun 2007
Posts: 17
Location: Lincoln, NE

PostPosted: Wed Nov 07, 2007 5:54 pm    Post subject: Reply with quote

you are a genius. someone call STS.
_________________
98 Trans Am pretty much stock
Back to top
View user's profile Send private message
TireFryer



Joined: 29 Mar 2006
Posts: 123

PostPosted: Wed Nov 07, 2007 6:07 pm    Post subject: Reply with quote

thats the funniest shit i've seen all week.

thanks for the laugh
Back to top
View user's profile Send private message AIM Address MSN Messenger
Shodown



Joined: 28 May 2007
Posts: 56

PostPosted: Wed Nov 07, 2007 6:14 pm    Post subject: Reply with quote

O...M...G...

Laughing
_________________
1997 Camaro RS
Back to top
View user's profile Send private message AIM Address
MightyBobo



Joined: 28 Mar 2006
Posts: 406
Location: Bellevue

PostPosted: Wed Nov 07, 2007 8:24 pm    Post subject: Reply with quote

This is one of the very few times Ive actually LAUGHED at a post.
_________________
Back to top
View user's profile Send private message AIM Address
blackdak318



Joined: 29 Mar 2006
Posts: 86

PostPosted: Wed Nov 07, 2007 8:43 pm    Post subject: Reply with quote

The best part is that I was at the computer lab in UNO. I couldn't help but just laugh my ass off, got a lot of weird looks. It was worth it. Surprised Laughing Laughing Laughing
_________________
- Mark
Back to top
View user's profile Send private message AIM Address
The Coach



Joined: 30 Mar 2006
Posts: 113
Location: omaha

PostPosted: Wed Nov 07, 2007 11:00 pm    Post subject: Reply with quote

DEE DA DEE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Back to top
View user's profile Send private message
BFate



Joined: 28 Mar 2006
Posts: 204
Location: Gretna

PostPosted: Thu Nov 08, 2007 7:06 am    Post subject: Reply with quote

Laughing
Back to top
View user's profile Send private message Send e-mail MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    Nebraska GM Modern Muscle Forum Index -> Lounge All times are GMT - 6 Hours
Goto page 1, 2, 3, 4, 5, 6, 7, 8  Next
Page 1 of 8
Stop watching this topic
 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum


Powered by phpBB 2.0.19 © 2001, 2002 phpBB Group